Book an appointment for dental implants at our Danforth & Broadview dental offices!
What are Dental Implants?
Dental Implants – Replacing Missing Teeth
If one or more of your teeth are missing, there are a number of ways to replace them. An alternative to bridges, partials or complete dentures may be dental implants. Implants are used to replace missing roots and support artificial replacement teeth. They are comfortable and look like natural teeth.
What are dental implants?
A dental implant is an artificial root made of titanium metal. It is inserted into the jawbone to replace the root of the natural tooth. An artificial replacement tooth is attached to the implant. The implant acts as an anchor to hold the replacement tooth in place.
Who can get dental implants?
If you are in good general health, have healthy gums and have enough bone in the jaw to hold an implant, dental implants may be right for you. If your jawbone has shrunk or if it has not developed normally, you may be able to have a bone graft to build up the bone. A bone graft is a way of adding new bone to your jawbone.
How dental implants are done
Your mouth will be examined and x-rays or a 3D scan may be taken of your jaw and teeth to find out if dental implants are right for you. Sufficient thickness & depth of the bone is required to support an implant.
During the first stage of surgery, the dental implant is placed into your jawbone beneath the gum tissue. As the tissue heals, the implant will bond with the bone and attach to the gum. It can take 4-6 months to heal.
During the second stage of surgery and once the tissue is healed, an implant supported crown will be attached to the implant. This is when your implant will replace all normal tooth function again.
Caring for my dental implant(s)
Because dental implants are placed in the jawbone, implant crowns attached to implants look and act much like natural teeth. Like natural teeth, implants need to be kept clean using a toothbrush and floss. We will show you the proper cleaning procedure for implants. Regular dental checkups are important so we can make sure that your bite is right and that your implants are not loose.
Where Can I Get Dental Implants
If you have any questions related to dental implant procedure, costs and/or whether or not you are a candidate please do contact Luma Dental right away, we’re happy to help.
We offer dental implants at our Danforth and Broadview dental clinic in Toronto.
Please book an appointment with our dentists to see if dental implants are the right option for you. Luma Dental provides excellent dental implant services to our patients in Toronto.
Book a Consultation for Dental Implants @ Danforth & Broadview
Want to make an appointment for dental implants at our Danforth dental clinic? Please request an appointment date and time below. We will get back to you ASAP to confirm the closest available date and time. Thank you!
A dental implant is an artificial tooth root replacement and is used in prosthetic dentistry. There are several types of dental implants; the most widely accepted and successful is the osseointegrated implant, based on the discovery by Swedish Professor Per-Ingvar Brånemark that titanium can be successfully fused into bone when osteoblasts grow on and into the rough surface of the implanted titanium. This forms a structural and functional connection between the living bone and the implant. A variation on the implant procedure is the implant-supported bridge, or implant-supported denture.
A typical implant consists of a titanium screw (resembling a tooth root) with a roughened surface. This surface is treated either by plasma spraying, etching or sandblasting to increase the integration potential of the implant. An osteotomy or precision hole is carefully drilled into jawbone and the implant is installed in the osteotomy.
Implant surgery is typically performed as an outpatient under general anesthesia or with Local anesthesia by trained and certified clinicians including general dentists, oral surgeons, and periodontists. An increasing number of general or cosmetic dentists as well as prosthodontists are also placing implants in relatively simple cases. The most common treatment plan calls for several surgeries over a period of months, especially if bone augmentation (bone grafting) is needed to support implant placements. At the other end of the surgery scale, some patients can be implanted and restored in a single surgery, in a procedure labeled “immediate function” and “teeth in an hour.”
A single implant procedure that involves an incision and “flapping” of the gum or gingiva (to expose the jawbone) takes about an hour, sometimes longer; multiple implants can be installed in a single surgical session lasting several hours. At the conclusion, the patient goes through a period of recovery, returns to consciousness and is sent home with a spouse or friend.
Healing and integration of the implant(s) with jawbone occurs over several months in a process called osseointegration. At the appropriate time, the restorative or cosmetic dentist or prosthodontist uses the implant(s) to anchor crowns or a prosthetic restoration containing several “teeth”. Since the implants supporting the restoration are integrated, which means they are biomechanically stable and strong, the patient is immediately able to masticate (chew) normally.
In an immediate function procedure, the gingiva is not flapped (Flapless). Instead, the surgeon removes a small plug of gingiva directly over the drilling site. The site is drilled and the implant is installed. Then a crown is immediately added. Patients are cautioned to give their new “teeth in an hour” ample healing/integration time (weeks or months) before attempting normal mastication.
There are different approaches to place dental implants after tooth extraction. The approaches are:
1. Immediate post-extraction implant placement.
2. Delayed immediate post-extraction implant placement (2 weeks to 3 months after extraction).
3. Late implantation (3 months after tooth extraction).
According to the timing of loading of dental implants, the procedure of loading could be classified into:
1. Immediate loading procedure.
2. Early loading (1 week to 12 weeks).
3. Staged loading (3-6 months).
4. Late loading (more than 6 months).
Most patients need the longer treatment plan, which has an excellent history going back many years. Before surgery, with the patient fully awake or during an earlier office visit, a prudent clinician planning mandibular implants will conduct a neurosensory examination to rule out altered sensation, thus setting a base line on nerve function. Also prior to surgery, a panoramic X-ray will be taken using a metal ball of known dimension so that calibrated measurements can be made from the image (to accurately locate “vital structures” such as nerves and the position of critical anatomical features such as the mental foramen, which is the transit point in the jawbone for the nerve which innervates the lip and chin).
At edentulous (without teeth) jaw sites, a pilot hole is bored into the recipient bone, taking care to avoid vital structures (in particular the inferior alveolar nerve or IAN within the mandible). A zone of safety, usually 2 mm, is the standard of care for avoiding vital structures like the IAN. When computed tomography (3D X-ray imaging) is used preoperatively to accurately pinpoint vital structures, the zone of safety may be reduced to 1 mm through the use of computer-aided design of surgical guides.
Drilling into jawbone usually occurs in several separate steps. The pilot hole is expanded by using progressively wider drills (typically between three and seven successive drilling steps, depending on implant width and length). Care is taken not to damage the osteoblast or bone cells by overheating. A cooling saline spray keeps the temperature of the bone to below 47 degrees Celsius (approximately 117 degrees Fahrenheit). The implant screw can be self-tapping, and is screwed into place at a precise torque so as not to overload the surrounding bone (overloaded bone can die, a condition called osteonecrosis, which may lead to failure of the implant to fully integrate or bond with the jawbone). Typically in most implant systems, the osteotomy or drilled hole is about 1mm deeper than the implant being placed, due to the shape of the drill tip. Surgeons must take the added length into consideration when drilling in the vicinity of vital structures.
Once properly torqued into the bone, a cover screw is placed on the implant, then the gingiva or gum is sutured over the site and allowed to heal for several months for osseointegration to occur between the titanium surface of the implant and jawbone.
After several months the implant is uncovered in another surgical procedure, usually under local anesthetic by the restorative dentist or prosthodontist, and a healing abutment and temporary crown is placed onto the implant. This encourages the gum to grow in the right scalloped shape to approximate a natural tooth’s gums and allows assessment of the final aesthetics of the restored tooth. Once this has occurred a permanent crown will be fabricated and placed on the implant.
An increasingly common strategy to preserve bone and reduce treatment times includes the placement of a dental implant into a recent extraction site. In addition, immediate loading is becoming more common as success rates for this procedure are now acceptable. This can cut months off the treatment time and in some cases a prosthetic tooth can be attached to the implants at the same time as the surgery to place the dental implants.
In all of these approaches, computer-based guidance has thrust itself onto the treatment stage. Not only will 3D digital imagery yield critical treatment guidance, the digital data can be used to manufacture precision drilling guides, virtually eliminating surgical errors.
Sinus lifting is a common surgical intervention. The trained general dentist, oral surgeon, or periodontist thickens the inadequate part of atrophic maxilla towards the sinus with the help of bone transplantation or bone expletive substance and as a result creates a better quality bone site for the implantation.
Bone grafting will be necessary in cases where there is a lack of adequate maxillary or mandibular bone in terms of front to back (lip to tongue) depth or thickness; top to bottom height; and left to right width. Sufficient bone is needed in three dimensions to securely integrate with the root-like implant. Improved bone height — which is very difficult to achieve — is particularly important to assure ample anchorage of the implant’s root-like shape because it has to support the mechanical stress of chewing, just like a natural tooth. If an implant is too shallow, chewing may cause a dangerous jawbone crack or full fracture.
Typically, implantologists try to place implants at least as deeply into bone as the crown or tooth will be above the bone. This is called a 1:1 crown to root ratio. This ratio establishes the target for bone grafting in most cases. If 1:1 or better cannot be achieved, the patient is usually advised that only a short implant can be placed and to not expect a long period of usability.
A wide range of grafting materials and substances may be used during the process of bone grafting / bone replacement. They include the patient’s own bone (autograft), which may be harvested from the hip (iliac crest) or from spare jawbone; processed bone from cadavers (allograft); bovine bone or coral (xenograft); or artificially produced bonelike substances (calcium sulfate with names like Regeneform; and hydroxyapatite or HA, which is the primary form of calcium found in bone). The HA is effective as a substrate for osteoblasts to grow on. Some implants are coated with HA for this reason.
Bone graft surgery has its own standard of care. In a typical procedure, the clinician creates a large flap of the gingiva or gum to fully expose the jawbone at the graft site, performs one or several types of block and onlay grafts in and on existing bone, then installs a membrane designed to repel unwanted infection-causing microbiota found in the oral cavity. Then the gingiva is carefully sutured over the site. Together with a course of internal antibiotics and external antibiotic mouth rinses, the graft site is allowed to heal (several months).
The clinician typically takes a new panoramic x-ray to confirm graft success in width and height, and assumes that positive signs in these two dimensions safely predicts success in the third dimension, depth. Where more precision is needed, usually when mandibular implants are being planned, a 3D or cone beam X-ray may be called for at this point to enable accurate measurement of bone and location of nerves and vital structures for proper treatment planning. The same X-ray data set can be employed for the preparation of computer-designed placement guides.
Correctly performed, a bone graft produces live vascular bone which is very much like natural jawbone and is therefore suitable as a foundation for implants.
Dental implant success is related to operator skill, quality and quantity of the bone available at the site, and also to the patient’s oral hygiene. Various studies have found the 5 year success rate of implants to be between 90-95%. Patients who smoke experience significantly poorer success rates.
Failure of a dental implant is often related to failure to osseointegrate correctly. A dental implant is considered to be a failure if it is lost, mobile or shows peri-implant (after implant) bone loss of greater than 1.0 mm in the first year and greater than 0.2mm a year thereafter.
Dental implants are not susceptible to dental caries but they can develop a periodontal condition called peri-implantitis. The cause may be infection that was introduced during surgery; or failure by the patient to follow correct oral hygiene routines. In either case, inflammation in the bone surrounding the implant causes bone loss (recession) which ultimately may lead to failure, often evidenced by the ability to “spin” an implant.
Peri-implantitis is often dealt with pre-emptively by clinicians who prescribe a course of antibiotics in the days prior to surgery; and post-surgically with another course of antibiotics and special oral rinses. Since peri-implantitis is generally easy to see on standard panoramic and periapical X-rays, prudent clinicians who suspect the problem will take an X-ray soon after surgery, and again at staged intervals post-operatively.
Risk of failure is increased in smokers. For this reason implants are frequently placed only after a patient has stopped smoking as the treatment is very expensive. More rarely, an implant may fail because of poor positioning at the time of surgery, or may be overloaded initially causing failure to integrate. If smoking and positioning problems exist prior to implant surgery, clinicians often advise patients that a bridge or partial denture rather than an implant may be a better solution.
There are no absolute contraindications to implant dentistry, however there are some systemic, behavioral and anatomic considerations that should be considered.
Particularly for mandibular (lower jaw) implants, especially in the vicinity of the mental foramen (MF), there must be sufficient alveolar bone above the mandibular canal also called the inferior alveolar canal or IAC (which acts as the conduit for the neurovascular bundle carrying the inferior alveolar nerve or IAN). The standard of care for mandibular implants calls for 3D or cone beam X-ray imaging (computer assisted tomography) because 3D enables precise measurements to 0.1mm by the implantologist, followed by precision treatment planning with computer-designed surgical guides.
Patients should be referred to an appropriate cone beam imaging center if 3D is not available in the implantologists practice. Cone beam systems (brand names include iCAT, NewTom, Accu-i-Tomo and TeraRecon) have been widely available in developed nations since 2001 or earlier. Many hospitals have dental modules for their multi-slice CT systems, since the mid 1980’s, for example the current GE Lightspeed and Philips Brilliance systems. And, companies who supply in-office X-ray systems are beginning to offer value-priced cone beam systems, such as the Planmeca Promax 3D, as clinicians fully recognize their utility as the gold standard and standard of care for certain cases in everyday use.
Failure to precisely locate the IAN and MF invites surgical insult by the drills and the implant itself. Such insult may cause irreparable damage to the nerve, often felt as a paresthesia (numbness) or dysesthesia (painful numbness) of the gum, lip and chin. This condition may persist for life and may be accompanied by unconscious drooling.
Lack of sufficient alveolar bone is another contraindication to the procedure. Typically, a preoperative in-office panoramic X-ray is taken to establish (with allowances for image distortion, a known problem with panoramic X-rays) in two dimensions (height and width) the amount of available bone. A bone graft or augmentation procedure, sometimes called guided bone regeneration may be performed and allowed to heal several months before implantation surgery. A new panoramic X-ray will help determine if the graft was successful.
This is an important step inasmuch as improved bone height is much more difficult to achieve than increased bone depth. For mandibular grafts, a 3D or cone beam X-ray enables measurement of bone height (top to bottom), width (left and right) and depth (front to back) to an accuracy of 0.1mm. The precision of cone beam has stimulated a new industry that produces computer-designed surgical guides based on the cone beam X-ray’s digital data. These surgery aids are employed by implantologists to precisely locate and drill into the mandible and maxilla, and to avoid vital structures.
Uncontrolled type II diabetes is a significant relative contraindication as healing following any type of surgical procedure is delayed due to poor peripheral blood circulation. Anatomic considerations include the volume and height of bone available. Often an ancillary procedure known as a block graft or sinus augmentation are needed to provide enough bone for successful implant placement.
There is new information about intravenous and oral bisphosphonate (taken for certain forms of breast cancer and osteoporosis, respectively) which may put patients at a higher risk of developing a delayed healing syndrome called osteonecrosis. Implants are contraindicated for some patients who take intravenous bisphosphonates. The many millions of patients who take an oral bisphosphonate (such as Actonel, Fosamax and Boniva) may be advised to stop the administration prior to implant surgery, then resume several months later. The American Dental Association has addressed bisphosphonates in an article entitled “Bisphosphonate medications and your oral health,” JADA, Vol. 137, page 1048, July 2006. In an Overview, the ADA stated “The risk of developing BON [bisphosphonate-associated osteonecrosis of the jaw] in patients on oral bisphosphonate therapy appears to be very low…”. The ADA Council on Scientific Affairs also employed a panel of experts who issued recommendations [for clinicians] for treatment of patients on oral bisphosphonates, published in June, 2006. The overview may be read online at ada.org.
Bruxism (tooth clenching or grinding) is another contraindication. The forces generated during bruxism are particularly detrimental to implants while bone is healing; micromovements in the implant positioning are associated with increased rates of implant failure. Bruxism continues to pose a threat to implants throughout the life of the recipient. Natural teeth contain a periodontal ligament allowing each tooth to move and absorb shock in response to vertical and horizontal forces. Once replaced by dental implants, this ligament is lost and teeth are immovably anchored directly into the jaw bone. This problem can be minimized by wearing a custom made mouthguard (such an NTI appliance) at night.
Postoperatively, after implants have been placed, there are physical contraindications that prompt rapid action by the implantology team. Excessive or severe pain lasting more than three days is a warning sign, as is excessive bleeding. Constant numbness of the gingiva (gum), lip and chin — usually noticed after surgical anesthesia wears off — is another warning sign. In the latter case, which may be accompanied by severe constant pain, the standard of care calls for diagnosis to determine if the surgical procedure insulted the IAN. A 3D cone beam X-ray provides the necessary data, but even before this step a prudent implantologist may back out or completely remove an implant in an effort to restore nerve function because delay is usually ineffective. Depending upon the evidence visible with a 3D X-ray, patients may be referred to a specialist in nerve repair. In all cases, speed in diagnosis and treatment are necessary.
There are over 100 dental implant companies available on the U.S. market. Notable companies include Bicon Dental Implants, BioHorizons, Nobel Biocare, Straumann, OsteoCare, Osteo-Ti, 3i, Zimmer, Astra Tech, Ankylos, Implant Direct, Intra-Lock, Lifecore, Bio-Lok and Diskimplant.
Specialists such as oral and maxillofacial surgeons and periodontists play a role in the placement of implant fixtures, however these procedures are not beyond the scope of general dentists or prosthodontists. Regardless of who places the implant, it is most appropriate for either a prosthodontist or general dentist to initiate and coordinate implant service, since they can best assess the merits of this treatment against other prosthetic options. However, the implantologist (the person performing the implant surgery) is ultimately responsible for correct placement in a co-treatment environment.
REQUEST A CONSULTATION
FIND OUT HOW WE CAN HELP YOU ACHIEVE YOUR GREATEST SMILE!